Description

Product Introduction

• Control Modes: Two temperature control modes: Air mode and Baby mode, controlled by a microcomputer.
• Power Options: Uses AC power and DC power alternatively; supports DC 12 V or DC 24 V power on the ambulance.
• Display: Set temperature, air temperature, baby temperature, and internal battery voltage can be displayed separately.
• Alarms: Failure alarm indication.
• Over‑Temperature Function: Can be equipped with > 37 °C temperature set function.
• Hood: Double‑wall acrylic glass hood with a side door, allowing the bassinet to be pulled out.
• Humidity: Natural air flow humidity.
• Height Adjustment: The height of the whole unit is adjustable.
• Systems: Oxygen supply system.
• Observation: Observation lamp.

Basic Configuration

• Main body (including the hood, controller, bassinet, internal battery, and observation lamp)
• Oxygen cylinders
• Oxygen supply system
• Skin temperature sensor
• I.V. Pole
• Mattress
• Adjustable stand

Main Parameters

• AC power requirement: AC 220‑230 V 50 Hz or AC 110‑120 V 50‑60 Hz, 400 VA
• DC power requirement: DC 12 V 10 A or DC 24 V 6 A
• Mode of control: Air mode and baby mode controlled by microcomputer
• Air temperature control range: 25 °C–37 °C (Override mode 37–38 °C)
• Baby temperature control range: 34 °C–37 °C (Override mode 37–37.5 °C)
• Skin temperature sensor accuracy: ± 0.2 °C
• Temperature difference between incubator temperature and average incubator temperature (under steady temperature condition): ≤ 1.0 °C
• Temperature uniformity: ≤ 1.5 °C (mattress is on the horizontal position)
• Noise inside hood: ≤ 52 dB(A)
• Failure alarm: Over‑temperature alarm, temperature deviation alarm, sensor alarm, motor fan failed alarm, power failure alarm, and so on.
• Battery continuous working time: 90 min (Set temperature is 36 °C—Ambient temperature is 15 °C)

Environmental Conditions

• Operating range: 10 °C ~ 30 °C (Set temperature should be 3 °C higher than the environment temperature)
• Ambient air movement rate: > 0.3 m/s, < 1.0 m/s

Product Packaging

• Package: Each unit is packed into two cartons.
• Main body dimensions: 1090 mm × 655 mm × 760 mm
• Cabinet dimensions: 1380 mm × 610 mm × 400 mm
• Main body gross weight: 80 kg
• Cabinet gross weight: 53 kg