Sterilizer Autoclave

The Sterilizer Room size can be customized according to your requests.

Main Technical Parameters

• Chamber divide layer, with 1 piece of 304 stainless steel barrier plates

Temperature Range

• Maximum temperature: The highest temperature limit for this equipment: 200°C
• The commonly used temperature: Customers are commonly used temperature: RT+20~140°C
• Thermal insulation properties: In furnace to achieve 200°C, No more than the outer wall temperature 45°C (room temperature+25°C)
• Test point: At least from the tank material 80mm, the door at least 80mm
• Test time: After reaches the set temperature, (constant temperature state) 10 min
• Temperature tolerance: Test set at 100°C, the temperature difference of tolerance is plus or minus 2 degrees
• Running noise: ≤75dB; The above indexes under the condition of normal pressure, no-load condition, is apart from the body wall space testing 1/6;

Box Structure

• Machine structure: Used on both sides of the air duct and the duct at the bottom of the cycle, single-door, the latch with fixed horn handle, Beautiful, practical design, adopts high temperature foaming silicone seal near the door. At the bottom of the caster wheel fixed.
• Lining material: SUS304 mirror stainless steel plate with 1.2 mm thickness, steel sheet metal bending processing, some trough strengthened behind to avoid heat deformation.
• Duct materials: SUS304 mirror stainless steel plate with 1.2 mm thickness, steel plate wear torx hole, sheet metal binding fixed.
• Exterior: External A3 cold plunge into carbon steel plate with 1.2 mm thickness, after antirust treatment spraying the hammer paint dry, resistance to dust.
• Air intake: To open the enclosure bottom, diameter of 60 mm
• Gas vent: Open the system after the pore, diameter of 60 mm is adjustable
• Enhance the solid frame: Use 3# Angle steel, angle steel and 4 parts adopts trough strengthen sheet metal welding.
• Insulation material: 120k grade aluminum silicate fiber filled with high density, thermal insulation layer thickness is 90 mm.

Circulatory System

• Heated air circulation: Adopt level circulation wind, the wind supply.
• Centrifugal rotor: Long axis centrifugal wind leaf, oven motor shock since the heat dissipation.
• Power of fan: 40W/220V

More Options

More other different sterilizer autoclave models are available.

Would you like me to organize these specs into a product-ready bilingual (English/Spanish) version for your listing?