Description

CCL-SG tube heater thermostat in the tank based on the original development of a new generation of new test-tube temperature device, the equipment is sub-24 two-hole and 40 hole. Be applied to each of the standard response to 1.5ml and 10ml tube, the heating apparatus using high-density block of aluminum alloy extrusion with large heat capacity, thermal resistance small, uniform heating and so on. Intelligent machines used figures temperature, arbitrarily set, automatic thermostat, easy-to-use, temperature control and high accuracy. Instruments have a number of significant timing device, the user can arbitrarily adjust 0-999 minutes time period.Technical parameters:

Temperature and time parameters:The SET button the first time can be set by the temperature, this time on the Pai SP digital display, the next row of data flashing LED this instrument to enter the temperature setting, and by the △ ▽ key to increase or decrease the link temperature under the value, then click the SET button on the Pai ST dashboard screen, the following row flashing data LED which sets the time to enter the state, according to the keys by the △ key ▽ to increase or decrease the waiting time under the parameters, then click the SET button the instrument to return to a normal operating state. Temperature and time setting completeUse:Connected to the power, open the power switch. Set the required temperature (classic 37 ℃), the middle block of the preheating when the heating indicator will be needed to remove the heating thermostat from the test tube by adding the solution, insert the heat from the hole, about 10 minutes after the temperature has reached a state of solution. Completed the experiment should be off, can not be hot air. To avoid working long hours and the casing is too hot and burns the body. Internal heating with temperature controller, the heating loop automatically adjusts the heating temperatureNote:1, the radiator started to work, can not be by hand as well as the physical contact of the heater radiator hole, the solution boiling will have a bubble, sometimes an overflow tube, the tube can not be at hand, but can not get his hands directly in vitro, in order to avoid scalding. The backing of the bubble-heated overflow tube should be removed immediately.2, is strictly prohibited for flammability. Explosive. Corrosive substance of heating, in order to avoid fires. Blast and so on is prohibited in the long-drying heating, turn off when not in use. Dry the body and dust with a dry brush to avoid moisture.