Description

I. Introduction

digital thermostat board also known as the microscope loading station (constant temperature plate) is widely used in sample roasting, drying, and other temperature testing of biological heredity, medical and health, environmental protection, biochemical laboratory, analytical rooms, education and scientific research. It is an essential tool mainly used for animal husbandry, health care in the breeding of sperm and blood, and used in conjunction with microscopes.

Its main features:

1. Heater using special molding aluminum production, with good temperature uniformity.
2. Face temperature with LED digital display, accurate reading, can control the body temperature at 37 degrees.
3. Heating quickly and evenly, easy to operate, safe to use.

II. Technical parameters

1. The working power supply: 220V 50HZ
2. The heating power supply: 10V 50HZ
3. Heating power: 5W
4. Temperature range: room temperature -50 °C, temperature control accuracy: ± 1 °C
5. The working size: 55 * 95MM

III. The use and maintenance

1. Prior to use please wipe the surface clean, do not allow water droplets, dirt, fouling and other foreign matter remains on the surface.
2. Do not place equipment like bottles or other containers on the surface.
3. Connected to the power supply, close the power switch.
4. Set the temperature: Press SET button can set or view the temperature set-point. Click the SET button, digital control characters start flashing, indicating instrument into the set state. Set the required temperature, press ▲ key to increase the set value, press ▼ key to decrease the value. Long press ▲ key or the ▼ key, data will change rapidly. Press SET button again to return to normal working condition, meter temperature setting is completed.
5. Constant temperature plate in a working condition, should have someone take care of it.
6. Work is completed, turn off the power switch, shut off power.
7. When the surface cooling, please clean it according to requirement (1).